972 - 638 - 0645
Part 1
Preparing for Installation
1- Prepare your place of work.
2- Apply a thin plumber beading putty in the sink bowl around the circumference of the hole.
3- Disassemble the insert for the drain.
4- Insert in the sink bowl the top half of the drain insert.
5- Press firmly back, compressing the putty of plumbers.
6- Add rubber gasket, cardboard ring and metal fastener to and secure the underside of the sink drain.
7- Clear the excess plumbers putty around the drain from the inside sink pan.
Part 2
Installing the Drainage Pipe
1- The drainage tube is installed roughly.
2- Mount ABS at the ends of the ABS drain pipe where appropriate in the kitchen drain attachments.
3- Disassemble the drain specification and configure it to be mounted in the project.
4- Build the tube for drainage.
Part 3
Finishing Up
1- By inserting the tube into the fastener, prepare a brass drain attachment and lay plastic gasket inside the opening.
2- Loosen the fastener and insert the brass tube into the ABS sheet-metal sink drain connector.
3- Complete the final gluing that the ABS drain pipe needs.
4- Attachment of the ABS pipe-metal sink drain.
5- Turn on hot, cold water.
